SOUTHERN CALIFORNIA RAILING CONTRACTOR SINCE 1999

FEATURED ON

Exterior Cable Railing

Home » Cable Railing System » Exterior Cable Railing

<p>This a stainless steel cable rail that is surface mounted at a home on Sea Level Rd in Malibu. The wood top rail and deck are constructed with Ipa wood</p>

195

This a stainless steel cable rail that is surface mounted at a home on Sea Level Rd in Malibu. The wood top rail and deck are constructed with Ipa wood

×

See Also: Indoor Projects

<p>This a stainless steel cable rail that is surface mounted at a home on Sea Level Rd in Malibu. The wood top rail and deck are constructed with Ipa wood</p>

195

<p>This a stainless steel cable rail that is surface mounted at a home on Sea Lane Drive in Malibu over looking Paradise Cove. The rails are installed on a Ipa wood deck</p>

197

<p>This is a stainless steel cable rail that is surface mounted at a home on Sea Lane Drive in Malibu over looking Paradise Cove. The rails are installed on a Ipa wood deck</p>

114

<p>This a stainless steel cable rail that is surface mounted with a Mangaris wood cap. The cable rail is constructed with 1/8″ thick stainless steel cable/wire allowing for maximum transparency</p>

102

<p>This a stainless steel cable rail that is surface mounted with a custom rectangle tapered post and a 1 1/4″ round top rail. The cable rail is constructed with 1/8″ thick stainless steel cable/wire allowing for maximum transparency. The wood deck is constructed Accoya Wood. Its one of the most durable woods and works really well on gates. It presents the least maintenance</p>

121

<p>This a surface mounted stainless steel cable rail constructed with Type 316 stainless steel Alloy. This cable rail system is fabircated with a bottom rail</p>

542

124

<p>This a surface mounted stainless steel cable rail constructed with Type 316 stainless steel Alloy. This cable rail system is fabircated with a bottom rail. The Type 316 Alloy is a must around marine environments</p>

541

<p>This a stainless steel cable rail that is surface mounted with a custom rectangle tapered post and a 1 1/4″ round top rail. The cable rail is constructed with 1/8″ thick stainless steel cable/wire allowing for maximum transparency. The rails were surface mounted on top of custom stone treads in sleek method without exposed plates</p>

123

<p>This a stainless steel cable rail that is surface mounted at a home on Sea Lane Drive in Malibu. The rails are fabricated with 1″x 2″ rectangle top rail and rectangle vertical posts for a more streamline look.</p>

126

<p>This a 42″ High code compliant Stainless Steel Cable Rail that is side mounted on an Ipe Wood Deck</p>

103

<p>This is a side mounted cable rail that has more of an industrial look.It wsa fabricated using hot roll steeland painted with flat black oil base paint</p>

100

<p>This is a side mounted stainless steel cable rail constructed with Type 304 Alloy stainless steel. The cable are 1/8″ diameter and the sleeker cable fasteners we mainly use is an Ultra Tec Invisiware cable fastener. The body of the Invisiware cable fastener is hidden in the vertical post making it a much cleaner look</p>

111

<p>This is a surface mounted stainless steel cable rail constructed with Type 304 Alloy stainless steel 1/2″ x 2″ soild flat bars. This double vertical post system helps achieve an asian modern look. All the cable rails we manufacture that incorporate wood tops/caps also require a metal top rail combined to allow proper cable tension</p>

106

<p>This a side mounted cable rail with a more industiral look. It’s constructed with a bottom rail, large exposed mounting plates and 1/2″ diameter standoff between the top rail and vertical posts</p>

107

<p>This is a side mounted stainless steel cable rail with a composite wood cap, same as the composite wood used on the deck</p>

109

<p>This a side mounted stainless steel cable rail with1 1 1/2″ swaure posts and a 1″ x 2″ rectangle top rail with 1/2″ diameter standoffs between the top rail and vertical post</p>

125

<p>This a side mounted stainless steel cable rail with1 1 1/2″ swaure posts and a 1″ x 2″ rectangle top rail with 1/2″ diameter standoff between the top rail and vertical post. The cables are 1/8″ diameter and is the standard when seeking more tanspaparency</p>

99

<p>This a side mounted stainless steel cable rail constructed with 1″ x 2″ rectangle tubing Type 316 Alloy. The mounting plates are recessed into the stucco for a cleaner look</p>

104

<p>This is a side mounted stainless steel cable rail that has a Ipe wood cap. It was mounted on the inside of the deck so that it prevents children from stepping on pony wall.</p>
<p>

110

<p>This is a side mounted stainless steel cable rail with a teak wood top rail. Side mounting the rail achieves that infinity edge look and makes the deck look larger.</p>

80

<p>This is a stainless steel cable rail mounted behind the architectural fiber board sliding.</p>

108

<p>This a side mounted stainless steel cable rail constructed with 1″ x 2″ rectangle tubing Type 316 Alloy. The mounting plates are recessed into the stucco for a cleaner look</p>

117

<p>This is a side mounted stainless steel cable rail with sqaure vertical posts, stainless steel top rail supporting the composite wood cap. 1/8″ stainless steel cable/wires allow for a more transsparent view</p>

83

85

82

105

<p>This is a side mounted stainless steel cable rail with a teak wood top rail. Side mounting the rail achieves that infinity edge look and makes the deck look larger. The mounting plates are recessed into the stucco preventing water and moister penetration.</p>

120

<p>This a side mounted stainless steel cable rail mounted over the finish stucco. We recommend that rails get installed prior to finsih stucco preventing possible water damage.</p>

119

<p>This is a side mounted stainless steel cable rail with square vertical posts,round top rail and 1/2″ diameter standoff between the top rail and vertical posts</p>

115

<p>This a side mounted stainless steel cable rail constructed with 1″ x 2″ rectangle tubing Type 316 Alloy. The mounting plates are recessed into the stucco for a cleaner look</p>

116

<p>This is a side mounted stainless steel cable rail with hand rail integrated.</p>

236

326

327

<p>This a stainless steel cable rail that is surface mounted at a home on Sea Lane Drive in Malibu over looking Paradise Cove. The rails are installed on a Ipa wood deck</p>

328

<p>This a stainless steel cable rail that is surface mounted at a home on Sea Level Rd in Malibu. The wood top rail and deck are constructed with Ipa wood. 1/8″ diameter cable were used with ultra-tec invisiware cable fasteners</p>

329

<p>This is a surface mounted stainless steel cable rail with 1″ x 1 1/2″ rectangle top rail, 1 1/2″ sqaure vertical posts and 1/2″ diameter standoff between the top rail and vertical posts.</p>

330

<p>This is a stainless steel cable rail constructed with 3/4″ x 2″ rectangle stainless steel flar bar and painted with a distress bronze finish. Using stainless steel on even painted cable rails alleviates corrosion and tea staining commonly an issue with stainless steel material at marine environments especially</p>

331

<p>This is a side mounted stainless steel cable rail. This cable rail system is the most common style cable rail fabricated by our company. All connections are welded and polished on site at the time of installation. No shims are used for alignment and no seams are shown in the top rail. Our rails are 100% fabricated in our factory in southern california and designed to meet building and safety code compliances,</p>

468

540

485

486

487

489

490

491

492

493

494

495

496

497

498

499

500

501

502

503

504

505

506

507

508

510

511

512

513

514

<p>This is a surface mounted stainless steel cable with a rectangle top rail and rectangle vertical posts with 1/8″ diameter cables/wires</p>

515

516

517

<p>This is a side mounted stainless steel cable rail with a composite wood cap, same as the composite wood used on the deck</p>

518

519

520

539

204

REQUEST A QUOTE

(800) 641-6050 Get a Quote